Jimbronie Posted July 27, 2015 Report Share Posted July 27, 2015 Hey guys, I recently got an Atari 130XE. Works great. However, it has an ingot power supply. I have seen on some other auctions people have removed the connector from the ingot and attached it to a tiny cell phone power pack. Is this advisable? What voltage/amp rating should one use if attempting this hack? Thanks for the info! Link to comment Share on other sites More sharing options...
RickR Posted July 27, 2015 Report Share Posted July 27, 2015 5 V DC 1.5 A 7.5 VA Max:varies, 25W 30W 40W Atari#C061982/CA024814600XL,800XL,65XE,130XE,XE Game System(Stole this from the Atari 8 bit FAQ). Safest thing is to find a pin out diagram and measure it yourself on your current power adapter. Link to comment Share on other sites More sharing options...
RickR Posted July 27, 2015 Report Share Posted July 27, 2015 PS - Real non-ingot power adapters are available on ebay for about $15 shipped. Link to comment Share on other sites More sharing options...
Guest brenski Posted July 28, 2015 Report Share Posted July 28, 2015 or better still, snip the din end of the cable and connect it up to a +5v modern adaptor plug Link to comment Share on other sites More sharing options...
Jimbronie Posted August 8, 2015 Author Report Share Posted August 8, 2015 Got my new power supply today. Thanks for sal the input. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.