Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 06/23/2014 in Posts

  1. 10 points
    Kid A

    Got me a Ms. Pac-Man cab!

    So a buddy of mine calls me up and asked me if I wanted his non working Ms Pac-Man cab. The deal was that if I fixed it, he could play it whenever he came down, which I had no problem with. This is what the cab looked like when I got it. The cab was pretty beat up. Just running my hand across the sides made the paint fall off of it. Someone had painted the entire cab black. As you can see the cab was in pretty bad shape. So even before I tried to make the thing actually work, I painted it black. I primered it first before doing so. At this point I actually tried to make it work. I found some wires that looked like they were spliced into. I figured these were the connections for power. There was no power plug when I got it. I got a PC power cable, cut the end off and spliced it into the existing cuts in the wiring. When I plugged it in, it powered on...however with some problems.. The screen was all distorted. I had found 10 different knobs in the back of the arcade. I turned all of them to see if it would fix it. Nothing did. I thought maybe they all have to be dialed in perfect. After 3 days of messing with these knobs, I was getting frustrated. I was staring at the back of the cab when I saw this metal bracket with a hole in it. I shined a flashlight through the hole and I saw a potentiometer with a screwdriver slot on it. I grabbed a screwdriver and turned it clockwise and it made it worse. So I went counterclockwise all the way and it made the screen totally clear! ...with some minor distorted on the right part of the screen . Just had to slightly turn it back clockwise to get rid of the distortion After that I spent a few minutes to dial in the colors properly. At this point, I got a proper power cable for the cab and installed it. The control panel overlay was pretty dirty and torn so that got replaced. Put some new buttons too. When I got done with that, I wanted to go all out. I ended up getting a repro glass bezel and installed it. The repro is very high quality. Very happy with it. My friend had got this thinking if he couldn't fix it, he was going to keep the Marquee and get rid of it. Knowing that I got this machine for free, I got a new Marquee and gave him the original. Got a high score save kit as well. Last thing I got was the panel art and new T molding. When I got the art in, I realized that if I were to install the front part as is, the coin door chop off the forehead of Ms. Pac-Man. So I had to raise the coin door 4.5 inches. I also was able to hide the bolts that hold the coin bucket in place below the surface of the wood so I didn't have to shove them to the front of the artwork. Once that was done I installed the art along with the new t molding. When I installed the cab was finally finished! I wish the color of the panel art was a closer match to the control panel overlay, but in the end, I think it came out pretty awesome. I'm forever grateful that my buddy gave me this arcade. It's definitely in my top 3 favorite arcade games of all time. It was a lot of work putting this thing together Here's a side by side of the before and after!
  2. 9 points
    Hey guys! I am just your average Retro Gaming fan! Grew up with the Intellivision, Commodore 64 and Atari 2600. Still love to collect and play and I also have a YouTube channel called Brian's Man Cave where I show off and play Retro consoles and games My buds The Atari Creep, The No Swear Gamer and ArcadeUSA often mention t his forum on their channels, so I decided to hop on board. Here is my latest video about The Atari Creep:
  3. 8 points
    TrekMD

    New Atari 2600 Homebrew - Galaga!

    The guys from ChampGames are currently working on an amazing home port of Galaga for the Atari 2600. I know NSG posted about it but this deserves its own thread. Head to the thread in AA to get the demo binary: Champ Games - Galaga 2600
  4. 8 points
    Scott Stilphen

    Galaga for the VCS at last!

    John Champeau proves once again why he's the best at doing arcade ports for the VCS (and puts the 7800 version to shame in the process):
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...