btbfilms76

The opening of your show is totally rad. There's no Saturday more classic than playing something like Yars Revenge with the family. Those were good scores too!     

I love that your family is so into this! This looks like it will be a fun show, I'm excited for more

In the first episode of 7800 Ave. we celebrate Howard Scott Warshaw's Birthday by playing a few rounds of Yars' Revenge. 
On the show we'll play 7800 games and 2600 games because thats the beauty of the system - you can play both. Play some Atari today with your friends and family and watch out for that zorlon cannon.

Nice

In the first episode of 7800 Ave. we celebrate Howard Scott Warshaw's Birthday by playing a few rounds of Yars' Revenge. 
On the show we'll play 7800 games and 2600 games because thats the beauty of the system - you can play both. Play some Atari today with your friends and family and watch out for that zorlon cannon.

In the first episode of 7800 Ave. we celebrate Howard Scott Warshaw's Birthday by playing a few rounds of Yars' Revenge. 
On the show we'll play 7800 games and 2600 games because thats the beauty of the system - you can play both. Play some Atari today with your friends and family and watch out for that zorlon cannon.

Help us get The Jag Bar and Lynx Lounge 600 subscribers this week!  Only 23 to go, if you haven't subscribed yet do it today, drinks on me.

Perfect.  This is a good start.  Its the only part of the cab that janky.  Cleaned the pot, if it still sticks ill just get a new one and my micro switches in the triggers need replaced.  

Perfect.  This is a good start.  Its the only part of the cab that janky.  Cleaned the pot, if it still sticks ill just get a new one and my micro switches in the triggers need replaced.  

Perfect.  This is a good start.  Its the only part of the cab that janky.  Cleaned the pot, if it still sticks ill just get a new one and my micro switches in the triggers need replaced.  

Perfect.  This is a good start.  Its the only part of the cab that janky.  Cleaned the pot, if it still sticks ill just get a new one and my micro switches in the triggers need replaced.  

I don't know specifically about the wire loom, but here's the Atari System 1 Manual if it's of help to anyone:
 
 
Atari System 1 Manual.pdf

From what I can see (so far) are they splicing these cables to ground? I think it may be good to trace these wires that are spliced with a multimeter in tone-test mode and go into continuity mode, see if you can get two probes, one on the socket and then trace the cables around the cabinet and see if it beeps.  I'm thinking many of those weird, spliced cables may be grounded to the coin mechanism 

If I were you, I would trace each one of those cables and remove those janky looking cables with some newer cables that are not oxidized in any way, they may be brittle now.  You mentioned your cabinet is in a bit of rough shape, I would recommend doing that once you get a good idea of where these cables are going.

While you're at it, get some of this: https://www.amazon.com/Hosa-G5S-6-DeoxIT-Contact-Enhancer/dp/B00FC4YO60/ref=pd_lpo_236_tr_img_2?ie=UTF8&psc=1&refRID=1E3GS6GR65RRRW3QA1G3
 
I totally swear by it, it removes any kind of oxidation (safely) from any electronic component.  You can actually get some at your local Radio Shack, too!  

Hey Gang, 
Some of you who follow me on Instagram already know I recently picked up a Roadblasters System 1 cabinet,  Its a little rough around some of the edges but for 250 it was hard to pass up, plus i get a little summer project - win win in my book.  
 
Ok so the only think that looks bad is the wire loom behind the coin door, there are some really sketchy hacks going on and I can't seam to find a picture  what its really suppose to look like... Im guessing I just match the like wire colors back but you can see in the picture that there are other bare wires jumping from nut to nut.  
 
Any thoughts or advice would be very welcomed. 
 

Hey Gang, 
Some of you who follow me on Instagram already know I recently picked up a Roadblasters System 1 cabinet,  Its a little rough around some of the edges but for 250 it was hard to pass up, plus i get a little summer project - win win in my book.  
 
Ok so the only think that looks bad is the wire loom behind the coin door, there are some really sketchy hacks going on and I can't seam to find a picture  what its really suppose to look like... Im guessing I just match the like wire colors back but you can see in the picture that there are other bare wires jumping from nut to nut.  
 
Any thoughts or advice would be very welcomed. 
 

Thanks so much!  Having a good time putting these together and walking down memory lane.  Trying to keep the fan boy vibe out of the show, these are all my games from when I was growing up so you're gonna hear the good the bad and the ugly... Hard Driving. Thanks again for your positive review of the show, just trying to keep it real.

Who is ready to blast some Robotrons? I am but not on this platform, this is good port but 7800 please.  I stink at this version, give me that twin stick goodness!!

Thanks so much!  Trying to find my voice in a sea of rant channels... I thin owe do a pretty good job of having a good time with out all the yelling LOL.  Thanks for subscribing, that means a lot.

Thanks so much!  Trying to find my voice in a sea of rant channels... I thin owe do a pretty good job of having a good time with out all the yelling LOL.  Thanks for subscribing, that means a lot.

Paperboy anyone?  

Who is ready to blast some Robotrons? I am but not on this platform, this is good port but 7800 please.  I stink at this version, give me that twin stick goodness!!

Who is ready to blast some Robotrons? I am but not on this platform, this is good port but 7800 please.  I stink at this version, give me that twin stick goodness!!

Thanks so much!  Trying to find my voice in a sea of rant channels... I thin owe do a pretty good job of having a good time with out all the yelling LOL.  Thanks for subscribing, that means a lot.

Wow, great channel! Love to see these dedicated console channels. Plus, your production value is really high, and you create a nice, easy-going tone for these videos. Quality stuff all-around. Subbed. Looking forward to more.

Paperboy anyone?