Jump to content
Sign in to follow this  
MaximumRD

The Atari 5200 gets lit (& fixed) with Steve & Pete! PS3 and Xbox360 controllers now work! (vid #33)

Recommended Posts

 

Wired-Up Retro
Published on Mar 2, 2019

In today's presentation my guest-host from the Atari 5200 Podcast, Pete Spivak, and I will show you how to use adapters to play your Atari 5200 with a wired PS3 and wired Xbox 360 controller.

Also shown is how to easily fix the Atari 5200 when the controllers aren't properly responding to your joystick/pad direction input with a  potentiometer adjustment.  This is a reliable method to troubleshoot your mother of all consoles.

The adapters needed to get the wired PS3 controllers compatible with the Atari 5200 are as follows:

1) a 15 pin PC Gameport controller to 15 pin Atari 5200 adapter.  These are obtained by contacting Atariage member, bohoki.  He makes these for under $20.

2) An adapter that converts Atari/Amiga/Sega controllers with a 9 pin connector to a 15 pin PC gameport.  These are available on Ebay from  "Ikonsgr74" and can be obtained for under $20

3) A Tototek Joypad Convertor version MD (for Playstation controller compatibility on the Megadrive/Sega Genesis).  These adapters are under $30.

4) A Brook Game Controller Super Convertor for adapting a PS3/PS4 controller to a PS2 console.

5) a USB splitter cable ($12 or less).

6) a powersupply with a USB cord (5Volts) OR a USB Hub with connected power supply.

To get the Xbox 360 controllers compatible with the 5200, you'll need one additional adapter.  It is the Mayflash Universal Adapter for Xbox360/PS3/PS2/PC USB.  These may be found at Amazon.  Current price for these on Amazon is $30, but that is subject to change.  Mayflash adapters tend to become scarce and go up in price.

Special thanks to Emforay for the music in today's episode. 
Intro: "Wander"
5200 fix-it music: "Candle Dance"
Music playing during comments at the end: "Sister"

DJ Kestutis gets credit for the outro song, "Reborn": License: http://goo.gl/ZSoZf

 

 

Share this post


Link to post
Share on other sites

Ummm...a 5 volt power supply?  No extra power supply should be needed.  The 5200 already supplies this.  The trak-ball controller gets its power from the 5200 controller ports which is exactly 5 volts.  I'm not dogging on them because it sounds like a cool project but a bit of time spent on researching the joystick ports would have revealed this.

For me, my 5200 controllers are in better condition than my wired 360 controllers.  Both thumbsticks on the 360 wired controllers I have are shot and have been replaced so much that the board simply can't tolerate another rebuild.  Through-hole connections for the thumbsticks and the trigger POTs are barely there now.  If I ever run across a decent 360 controller I might try doing this.  

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...