Popartliberty Posted July 12, 2019 Report Share Posted July 12, 2019 Hello coleco fans. I finally got around to soldering the pcb mod to the colecovision and followed the instructions exactly, but I see nothing on the LCD television. Does anyone have any troubleshooting tips for me ? Thanks. Alex Quote Link to comment Share on other sites More sharing options...
CrossBow Posted July 24, 2019 Report Share Posted July 24, 2019 Is that the guy in Turkey? I;ve only used his Intellivision AV composite kits as I find his to produce the best overall results. But on the CV I've used the Retrofixes boards and those are excellent! As to your issue, make sure you still have it all working through RF just to make sure the RF modulator and the rest of the logic is still good. Otherwise there isn't much there to check. Just make sure nothing is bridged where it shouldn't be and that your grounds are properly in place. Also I don't grab the audio from the RF modulator, I grab it from the right leg near the upper right corner of the RF modulator near the back of the main board PCB. Quote See what I'm up to over at the Ivory Tower Collections: http://www.youtube.com/ivorytowercollections Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.