So i turned it on with an American game in it and this red box came up (i guess it says not compatible). I turned it off and hit the switch and the red box still came up. I then hit the switch while the system was on and still nothing. Anyone have a clue? Thanks yall
So i got a Japanese gamecube. Region switch?
Started by
jmjustin6
, Oct 29 2017 04:29 PM
6 replies to this topic
#1
jmjustin6
-
- Member
-
- 1,476 posts
Pear Member
Posted 29 October 2017 - 04:29 PM
Alright i need some help here. I git this Japanese gamecube from a local collector. I took it home and realized there is a switch underneath it. I can only imagine it is a region switch? But again im not sure.
So i turned it on with an American game in it and this red box came up (i guess it says not compatible). I turned it off and hit the switch and the red box still came up. I then hit the switch while the system was on and still nothing. Anyone have a clue? Thanks yall
So i turned it on with an American game in it and this red box came up (i guess it says not compatible). I turned it off and hit the switch and the red box still came up. I then hit the switch while the system was on and still nothing. Anyone have a clue? Thanks yall
- The Professor and kamakazi20012 like this
#3
kamakazi20012
-
- Member
-
- 1,346 posts
Pear Member
Posted 30 October 2017 - 04:14 PM
Nope...doesn't match. I'm trying!
Just a step of elimination...take a q-tip and some kind of gentle cleaner (alcohol works) and clean the lens on the drive. See what that does?
I'm doing as much research as I can to try and find out what that message says.
- jmjustin6 likes this
#4
kamakazi20012
-
- Member
-
- 1,346 posts
Pear Member
Posted 30 October 2017 - 04:30 PM
Ok...did a translation. This:
ディスクを読み取れませんでした。詳細については、任天堂のゲームキューブの取扱説明書をお読みください。
Translates to:
The disc could not be read. Please read the Nintendo GameCube Instruction Booklet for more information.
If you remove the words "Nintendo GameCube" from the English error message that USA models can display you end up with:
ディスクを読み取れませんでした。
詳細は取扱説明書をご確認ください。
...and that looks about like the message you are getting. So your GameCube possibly can't read discs for some reason. You might want to try to either find someone not afraid to take it apart or if you feel comfortable doing it yourself take it apart and see what was done. It is very possible someone did the mod and did not do it correctly. Either that or it is a region switch that supports PAL instead of our NTSC standard.
I hope that helps. I will see if I can dig more information up.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
