Jump to content

chas10e

Member
  • Content Count

    742
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by chas10e

  1. Heh, I didn't know Astroblast could be played with paddles as well. it's a LOT better that way !!!! I always tried with a joystick .... needless to say much less "joy"
  2. I got my Artfair poster in and old windowpane I rescued.
  3. Yeah paddle games are some of my favorites , a 2'nd set and you can play 4 player Warlords (some reason my nephews like it better than Midevil Mayhem) For cleaning the paddles I usually reference "Slowcoders guide" on Atari age https://atariage.com/forums/topic/184296-slowcoders-guide-to-cleaning-up-your-2600/?do=findComment&comment=2316794 Specifically what console are you playing on ? original hardware or a flashback unit ?
  4. I usually just use 90% rubbing alcohol and q-tips until a clean q-tip pretty much stays clean. I'll do the first swab on the edge connector itself then with the dirty q-tip swab out the othe schmeg whatever it may be around inside the port , same with the 2'nd q-tip ect. the 7800 shells with shutter doors just open with a push but the 2600 carts shutter doors have a catch that needs to be released. At THIS post, I realized the "pokey-stabbers" on the 7800 console prehaps serve a dual purpose as to enable the opening of the door on a 2600 cart for backward-compatibility I
  5. yeah the reset & game start switch have a wider base with a spring inside, I just happened to have a 4 switch board loose ( I forget why) anyways there is prolly a seperate file someone already made for that the foil is some kind of shielding and duct work silver tape would prolly do the job And yeah they the same switches on a heavy sixer imma put a 3d printer on my birthday wish list 'cause I NEED atleast one more thing in my apartment 😉
  6. I had thought this was similar to the official " Creep Cover"
  7. I would think if NES games are listed as "tested & working" means whomever selling was blowing profusely into the cart slot & licking the edge-connector until the thing booted at-least ONCE. If listed as "untested" they may have tried the above but didn't boot -or- it was in a shoebox they found in the attic that's been there for 20+ years with no contact at all Even though you want to play your much anticipated new game, my advice would be to not do the above right out of the mailing package. Great tips from the other members here the USPS Web site is a good start on re
  8. another solution ..... . . . . . . . . . . . .
  9. I did post a higher score but doesn't really affect the standings , I'd still be in 7'th place :) The "format" used for posting a score was off by me in placing it at the end of a post as opposed to the top line of the post is a fault Great job everybody & welcome to all the new members
  10. Yeah there is a muscle memory thing associated with the nudging with the button and you can figger out just about exactly how far you can nudge without tilting. The benefit of how the tiltb-ob work in this game is it "settles" almost instantly the moment you stop moving it :D I would imagine the "lag" has an affect on the ball movement sort of like how people complain about the lag using the Wavebird on the Cube. This is what I wear when I'm out playing pinball, The kitty is my friends cat "Marty" who recovered from some serious illness and some costly injections. The "Marty pin" was p
  11. Great video & score, it was rather odd the on the bonus count the first time on real hardware so I suspect you score may have been higher but the "squad challenges" here are just for fun to revisit games from when us old timers were young and to expose the young fellows to these games. Another great video, I really liked the super short-plung then getting the extra ball off the slingshot right away! the visit from the cat was hilarious as cats & pinball is an "actual thing" Again the "squad challenge" is for fun but for high stakes tournament physical pinball, when possibl
  12. THOSE AREN'T STAIRS !!!! their "slingshots" https://www.ipdb.org/glossary.php#S And don't tell me the ball is square either 'cause balls ain't square.
  13. I got both lower case & upper case , think I was playing the lower case , I imagine the tilt is a little looser :P
  14. Along with nudging skills , there are also plunging skills, took a tip from @nosweargamer actually & go for the extra ball right away just a little more than a half -plunge will get it in the fuji-lane After getting the extra ball, if you can get it back in the shooter-lane a full plunge will get mebbe a couple of the 3 top roll-overs to increase the pops. with an extra ball the value is held 😉 Then constant nudging throughout the game trying to work the bonus-lane and keep it from draining I'm usually just "ape-flipping", can't really do a "slap-save" but I suppose it's pos
  15. 204,180 Don't tilt ! You'll lose your extra ball as well as ball in play :'(
  16. 14,029 There are many skills in physical pinball to develop, nudging skills is one of them, in many cases you're trying to transfer energy to the ball to manipulate it's trajectory. timing the "bump" on the machine with your hand when the ball is in contact with a post or a rail is key. you can "bump" the lockdown bar forward on either side or even downward (helps with ball rattle I think), you can even nudge the side of the cabinet halfway up the side to make the ball move out slightly towards the center of the table to miss the top of a sling-shot so you can catch it on the flip
  17. The house I grew up in, my brother bought a pool table and was down in the "cellar" it was never "fixed up" in any way but during one period we had thick cardboard on the wall and was able to perform some graffiti with the chalk. A few private pinball pinball locations I had played at are in the basements of homes, one is a "finished basement" with hardwood floor and Sheetrock, another is just wall paint on the foundation wall with posters and "wall hanger" play-fields & backglasses and yet another is painted walls with murals painted, one area is like castle walls , another is Mario
  18. Just found this: https://www.racketboy.com/forum/viewtopic.php?p=726298#p726298 from what I understand the developer can still be contacted for support but I haven't found it yet.
  19. I don't think anyone had any success in removing the yellow hue. I had read the size is the same as a pool ball , but some cue balls are slightly larger for the ball return , not sure what size snooker balls are or boccie balls. I like the yellow hue on mine , gives it that aged look :)
  20. I have a car exactly like that , except it's a Toyota & a sedan Welcome to the forums @Zerobeat2004 :) I did enjoy introducing my younger nephews to my Atari games. the expressions of how simplistic and low res- these games are and their scoffing at them is all a part of the experiance. then when it comes to playing them how all that dissolves into enjoyment and sharing laughs. I am now experiencing them introducing me to newer games , "Plants Vs Zombies" was a new one where my nephew just unloads on me from some unknown location while I wander around aimlessly giggling at t
  21. Somewhere around the six minute mark in @Funkmaster V 's video he has a cart you produced. Is is somewhat based upon this diagnostic cart ? .... further in the video there was something else you produced but I forget where exactly.
  22. Yeah I think the story goes that the engineers just hacked whatever carts they had laying around & stuck the typewritten "diag" label on there. I do forget where I got it, I messed with it a bit when I first got it. The blue "shorting plugs" came from another same location. OK I remember it was on e-bay & the member did have the shorting plugs but listed them separately on AA , he shipped them together that was back in 2013 I hadn't gone through the service manual to really figger out how these are used. I'd kind of like to get the binder & original documentation http://
  23. I dunno if there is any specific sized "Avery labels" I'm sure there are different kinds of tape. I actually like the el-cheapo masking tape just torn off on each end. it gives it "character" Speaking of charecters , I like the "Mr. Bill" in Circus Atari I recall a homebrew/hack of Circus that when the clown misses the tetter-totter & "slaps-out" on the ground he bleeds-out as well.https://atariage.com/forums/topic/207391-circus-atariage-2600/
  24. Oh yeah, I wanted to comment on the personalized end label. "Not to shabby !" as others develope and stack up on a shelf it's be nice to see a pic perhaps with it's own thread. I will usually look at the face label for the title of the game but usually pass on buying any carts without the end labels. There are some carts out there that were factory without end labels (maybe one or two) so I hope your hunt finds those "rares" Another "trick" if you find a cart of "value" is to bury it in a stack of commons and offer a fair price for the lot (used to be $0.50 a cart then a buck a cart)
  25. Shoot me a PM, that crew needs some serious counseling ! Warf has some anger issues & Sulu is feeling pretty small.
×
×
  • Create New...