-
Posts
41 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Store
Events
Downloads
Posts posted by RobertLM78
-
-
Never knew it even existed.
-
-
-
This a "contemporary" SAMS or a "vintage" one? Wonder if it's just a matter of a bad RAM chip....
-
7 hours ago, - Ω - said:
I had these intercoms and really enjoyed them, until new neighbors moved in next door with a pair on the same frequency. I ended up having to buy a new set with multiple channels. Radio Shack.
My little brother and I would use them to chat after bedtime. Also used them for pranks and hijinx, like suddenly buzzing a roomfull of people XD
-
- - Ω -, socrates63 and TrekMD
- 3
-
-
2 hours ago, - Ω - said:
That brings up the age old question... Ginger or Maryanne? For me it's always been a no brainer, Maryann of course!
Yeah, I'm with you on that - Ginger's real pretty and all, but Maryanne's got that wholesome girl next door look 🙂
-
-
-
-
23 hours ago, - Ω - said:
If I were to make suggestions to people just entering the TI world, my suggestions would be, in order of purchase...
1) FinalGROM cartridge
2) TIPI/32K Sidecar
3) F18A VGA video upgrade
... then later ...
4) Speech Synthesizer
Yeah, those are probably all you need, really to get the most out of the system.
-
17 hours ago, RickR said:
And after a day of drying time, I fired it up. Still the same. It works, but freezes up after about 30 seconds. I'm glad I didn't break it at least.
Next steps are some diagnosis steps. Start with the power adapter and the voltage regulators.
Hey, the same behavior after the cleaning is a good thing... 🙂
-
12 hours ago, - Ω - said:
assuming you have any peripheral cards you cannot live without. If you want a small format TIPI (limited to 32K RAM) for the storage, PDF and Internet/Network aspects, the TIPI/32K sidecar version that fits in a speech synthesizer case is the least expensive way to go, although it limits future growth unlike the PEB
Naw, there's nothing in my PEB that can't be "modernized" with the TIPI. You bring up an interesting point, speaking of the 32k - do you suggest that TIPIs can 'emulate' more than that? Can a TIPI 'emulate' something like say, the SAMS card? My 32k card is acting squirrelly and probably has some bad RAM chips. Other than the memory expansion, there's nothing much else in there besides an RS232 and disk controller. Didn't you have a few extra toys in yours like a realtime clock? I could definitely see the advantage to an internal TIPI with such extra goodies.
-
Before getting a PEB i had a parallel port that plugged right into the side bus expansion. Getting the PEB made that obsolete- and now the PEB is sort of obsolete since i have the nanoPEB. And the nanoPEB will probably become obsolete whenever i get around to finally putting a TIPI together.
-
-
On 9/15/2023 at 10:41 AM, TMOP69 said:
I hope that we will finally see also the SDD99. It will allow disk support, SAMS, p-code and the ability to run carts similarly to FG99. 🙂
Sounds sweet - i'm not familiar with that project, so i'll have to do some looking, but having SAMS and P-Code would be awesome.
-
-
-
On 3/25/2023 at 9:58 PM, - Ω - said:
I believe it was a word processor cartridge with it's own parallel printer port. Sort of a poor man's word processing system for those who could not afford a P-Box and/or separate RS-232 at the time.
My poorman solution in the early 90s was Beyond WordWriter with a DB-10 parallel printer interface
-
On 11/1/2022 at 5:54 AM, - Ω - said:
I've not played Donkey Kong on my TI in about eight years. It's a game I've never been good at. ☹️
I've never been great at it either, but i still like it 🙂
-
-
-
TI gamepad available from Retrogameboyz
in Texas Instruments
Posted
Thanks @RickR - i've actually been on the hunt for a modern replacement solution for the old 'sticks - a second spare pair which i don't expect to last too long